Hermann–Mauguin notation

From Infogalactic: the planetary knowledge core
(Redirected from Hermann-Mauguin notation)
Jump to: navigation, search

In geometry, Hermann–Mauguin notation is used to represent the symmetry elements in point groups, plane groups and space groups. It is named after the German crystallographer Carl Hermann (who introduced it in 1928) and the French mineralogist Charles-Victor Mauguin (who modified it in 1931). This notation is sometimes called international notation, because it was adopted as standard by the International Tables For Crystallography since their first edition in 1935.

The Hermann–Mauguin notation, compared with the Schoenflies notation, is preferred in crystallography because it can easily be used to include translational symmetry elements, and it specifies the directions of the symmetry axes.[1]

Point groups

Rotation axes are denoted by a number n — 1, 2, 3, 4, 5, 6, 7, 8 ... (angle of rotation φ = 360° / n). For improper rotations, Hermann-Mauguin symbols show rotoinversion axes, unlike Schoenflies and Shubnikov notations, where the preference is given to rotation-reflection axes. The rotoinversion axes are represented by the corresponding number with a macron, n1, 3, 4, 5, 6, 7, 8 ... The symbol for a mirror plane (rotoinversion axis 2) is m. The direction of the mirror plane is defined as the direction of perpendicular to the plane (the direction of 2 axis).

Hermann-Mauguin symbols show symmetrically non-equivalent axes and planes. The direction of a symmetry element is represented by its position in the Hermann-Mauguin symbol. If a rotation axis n and a mirror plane m have the same direction (i.e. the plane is perpendicular to axis n), then they are denoted as fraction \tfrac{n}{m} or n/m.

If two or more axes have the same direction, the axis with higher symmetry is shown. Higher symmetry means that the axis generates a pattern with more points. For example, rotation axes 3, 4, 5, 6, 7, 8 generate 3-, 4-, 5-, 6-, 7-, 8-point patterns, respectively. Improper rotation axes 3, 4, 5, 6, 7, 8 generate 6-, 4-, 10-, 6-, 14-, 8-point patterns, respectively. If both, the rotation and rotoinversion axes satisfy the previous rule, the rotation axis should be chosen. For example, \tfrac{3}{m} combination is equivalent to 6. Since 6 generates 6 points, and 3 generates only 3, 6 should be written instead of \tfrac{3}{m} (not \tfrac{\bar 6}{m}, because 6 already contains mirror plane m). Analogously, in the case when both 3 and 3 axes are present, 3 should be written. However we write \tfrac{4}{m}, not \tfrac{\bar 4}{m}, because both 4 and 4 generate four points. In the case of the \tfrac{6}{m} combination, where 2, 3, 6, 3, and 6 axes are present; axes 3, 6, and 6 all generate 6-point patterns, but the latter should be used because it is a rotation axis — the symbol will be \tfrac{6}{m}.

Finally, the Hermann-Mauguin symbol depends on the type of the group.

Groups without higher-order axes (axes of order three or more)

These groups may contain only two-fold axes, mirror planes, and inversion center. These are the crystallographic point groups 1 and 1 (triclinic crystal system), 2, m, and \tfrac{2}{m} (monoclinic), and 222, \tfrac{2}{m}\tfrac{2}{m}\tfrac{2}{m}, and mm2 (orthorhombic). If the symbol contains three positions, then they denote symmetry elements in the X, Y, Z direction, respectively.

Groups with one higher-order axis

  • First position — primary direction — Z direction, assigned to the higher-order axis.
  • Second position — symmetrically equivalent secondary directions, which are perpendicular to Z-axis. These can be 2, m, or \tfrac{2}{m}.
  • Third position — symmetrically equivalent tertiary directions, passing between secondary directions. These can be 2, m, or \tfrac{2}{m}.

These are the crystallographic groups 3, 32, 3m, 3, and 3\tfrac{2}{m} (trigonal crystal system), 4, 422, 4mm, 4, 42m, \tfrac{4}{m}, and \tfrac{4}{m}\tfrac{2}{m}\tfrac{2}{m} (tetragonal), and 6, 622, 6mm, 6, 6m2, \tfrac{6}{m}, and \tfrac{6}{m}\tfrac{2}{m}\tfrac{2}{m} (hexagonal). Analogously, symbols of non-crystallographic groups (with axis of order 5, 7, 8, 9 ...) can be constructed. These groups can be arranged in the following table

Schoenflies HM symbol 3 4 5 6 7 8 9 10 11 12 ... \infty
C_{n} n 3 4 5 6 7 8 9 10 11 12 ... \infty
C_{nv} nm 3m 5m 7m 9m 11m \inftym
nmm 4mm 6mm 8mm 10mm 12mm
S_{2n} \bar{n} 3 5 7 9 11 \tfrac{\infty}{m}
S_{n} 4 8 12
C_{\tfrac{n}{2}h} 6 10
C_{nh} \tfrac{n}{m} \tfrac{4}{m} \tfrac{6}{m} \tfrac{8}{m} \tfrac{10}{m} \tfrac{12}{m}
D_{n} n2 32 52 72 92 11 2 \infty2
n22 422 622 822 10 2 2 12 2 2
D_{nd} \bar{n}\tfrac{2}{m} 3\tfrac{2}{m} 5\tfrac{2}{m} 7\tfrac{2}{m} 9\tfrac{2}{m} 11\tfrac{2}{m} \tfrac{\infty}{m}m
D_{\tfrac{n}{2}d} \bar{n}2m=
=\bar{n}m2
42m 82m 12 2m
D_{\tfrac{n}{2}h} 6m2 10m2
D_{nh} \tfrac{n}{m}\tfrac{2}{m}\tfrac{2}{m} \tfrac{4}{m}\tfrac{2}{m}\tfrac{2}{m} \tfrac{6}{m}\tfrac{2}{m}\tfrac{2}{m} \tfrac{8}{m}\tfrac{2}{m}\tfrac{2}{m} \tfrac{10}{m}\tfrac{2}{m}\tfrac{2}{m} \tfrac{12}{m}\tfrac{2}{m}\tfrac{2}{m}
Labeled Triangle Reflections.svg
Hexagon reflections.svg

It can be noticed that in groups with odd-order axes n and n the third position in symbol is always absent, because all n directions, perpendicular to higher-order axis, are symmetrically equivalent. For example, in the picture of a triangle all three mirror planes (S0, S1, S2) are equivalent — all of them pass through one vertex and the center of the opposite side. For even-order axes n and n there are \tfrac{n}{2} secondary directions and \tfrac{n}{2} tertiary directions. For example, in the picture of a regular hexagon one can distinguish two sets of mirror planes — three planes go through two opposite vertexes, and three other planes go though the centers of opposite sides. In this case any of two sets can be chosen as secondary directions, the rest set will be tertiary directions. Hence groups 42m, 62m, 82m, ... can be written as 4m2, 6m2, 8m2, ... For symbols of point groups this order usually doesn't matter; however, it will be important for Hermann-Mauguin symbols of corresponding space groups, where secondary directions are directions of symmetry elements along unit cell translations b and c, while the tertiary directions correspond to the direction between unit cell translations b and c. For example, symbols P6m2 and P62m denote two different space groups. This also applies to symbols of space groups with odd-order axes 3 and 3. The perpendicular symmetry elements can go along unit cell translations b and c or between them. Space groups P321 and P312 are examples of the former and the latter cases, respectively.

The symbol of point group 3\tfrac{2}{m} may be confusing; the corresponding Schoenflies symbol is D3d, which means that the group consists of 3-fold axis, three perpendicular 2-fold axes, and 3 vertical diagonal planes passing between these 2-fold axes, so it seems that the group can be denoted as 32m or 3m2. However, one should remember that, unlike Schoenflies notation, the direction of a plane in a Hermann-Mauguin symbol is defined as the direction perpendicular to the plane, and in the D3d group all mirror planes are perpendicular to 2-fold axes, so they should be written in the same position as \tfrac{2}{m}. Second, these \tfrac{2}{m} complexes generate an inversion center, which combining with the 3-fold rotation axis generates a 3 rotoinversion axis.

Groups with n = \infty are called limit groups or Curie groups.

Groups with several higher-order axes

These are the crystallographic groups of a cubic crystal system: 23, 432, \tfrac{2}{m}3, 43m, and \tfrac{4}{m}3\tfrac{2}{m}. All of them contain four diagonal 3-fold axes. These axes are arranged as 3-fold axes in a cube, directed along its four space diagonals (the cube has \tfrac{4}{m}3\tfrac{2}{m} symmetry). These symbols are constructed the following way:

  • First position — symmetrically equivalent directions of coordinate axes X, Y, Z. They are equivalent due to the presence of diagonal 3-fold axes.
  • Second position — diagonal 3 or 3 axes.
  • Third position — diagonal directions between any two of three coordinate axes X, Y, and Z. These can be 2, m, or \tfrac{2}{m}.

All Hermann-Mauguin symbols presented above are called full symbols. For many groups they can be simplified by omitting n-fold rotation axes in \tfrac{n}{m} positions. This can be done if the rotation axis can be unambiguously obtained from the combination of symmetry elements presented in the symbol. For example, the short symbol for \tfrac{2}{m}\tfrac{2}{m}\tfrac{2}{m} is mmm, for \tfrac{4}{m}\tfrac{2}{m}\tfrac{2}{m} is \tfrac{4}{m}mm, and for \tfrac{4}{m}3\tfrac{2}{m} is m3m. In groups containing one higher-order axis, this higher-order axis cannot be omitted. For example, symbols \tfrac{4}{m}\tfrac{2}{m}\tfrac{2}{m} and \tfrac{6}{m}\tfrac{2}{m}\tfrac{2}{m} can be simplified to 4/mmm (or \tfrac{4}{m}mm) and 6/mmm (or \tfrac{6}{m}mm), but not to mmm; the short symbol for 3\tfrac{2}{m} is 3m. The full and short symbols for all 32 crystallographic point groups are given in crystallographic point groups page.

Besides five cubic groups, there are two more non-crystallographic icosahedral groups (I and Ih in Schoenflies notation) and two limit groups (K and Kh in Schoenflies notation). The Hermann-Mauguin symbols were not designed for non-crystallographic groups, so their symbols are rather nominal and based on similarity to symbols of the crystallographic groups of a cubic crystal system.[2][3][4][5][6] Group I can be denoted as 235, 25, 532, 53. The possible short symbols for Ih are m35, m5, m5m, 53m. The possible symbols for limit group K are \infty \infty or 2 \infty, and for Kh are \tfrac{\infty}{m}\infty or m\bar{\infty} or \infty \infty m.

Plane groups

Plane groups can be depicted using the Hermann-Mauguin system. The first letter is either lowercase p or c to represent primitive or centered unit cells. The next number is the rotational symmetry, as given above. The presence of mirror planes are denoted m, while glide reflections are denoted g.

Space groups

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The symbol of Space groups is defined by combining the uppercase letter describing the lattice type with symbols specifying the symmetry elements. The symmetry elements are ordered the same way as in the symbol of corresponding point group (group that is obtained if one removes all translational components from the space group). The symbols for symmetry elements are more diverse, because in addition to rotations axes and mirror planes, space group may contain more complex symmetry elements — screw axes (combination of rotation and translation) and glide planes (combination of mirror reflection and translation). As a result, many different space groups can correspond to the same point group. For example, choosing different lattice types and glide planes one can generate 28 different space groups from point group mmm, e.g. Pmmm, Pnnn, Pccm, Pban, Cmcm, Ibam, Fmmm, Fddd.

Lattice types

These are the Bravais lattices in three dimensions:

  • P — Primitive
  • I — Body centered (from the German "Innenzentriert")
  • F — Face centered (from the German "Flächenzentriert")
  • A — Base centered on A faces only
  • B — Base centered on B faces only
  • C — Base centered on C faces only
  • R — Rhombohedral
Primitive Base centered Face centered Body centered Rhombohedral
Primitive, P Base centered, C Face centered, F Body centered, I Rhombohedral in hexagonal setting, R

Screw axes

The screw axis is noted by a number, n, where the angle of rotation is \tfrac{360^\circ}{n}. The degree of translation is then added as a subscript showing how far along the axis the translation is, as a portion of the parallel lattice vector. For example, 21 is a 180° (twofold) rotation followed by a translation of ½ of the lattice vector. 31 is a 120° (threefold) rotation followed by a translation of ⅓ of the lattice vector.

The possible screw axes are: 21, 31, 32, 41, 42, 43, 61, 62, 63, 64, and 65. There are 4 enantiomorphic pairs of axes: (31 — 32), (41 — 43), (61 — 65), and (62 — 64). This enantiomorphism results in 11 pairs of enantiomorphic space groups, namely

Crystal system Tetragonal Trigonal Hexagonal Cubic
First group
Group Number
P41
76
P4122
91
P41212
92
P31
144
P3112
152
P3121
151
P61
169
P62
171
P6122
178
P6222
181
P4132
213
Second group
Group Number
P43
78
P4322
95
P43212
96
P32
145
P3212
154
P3221
153
P65
170
P64
172
P6522
179
P6422
182
P4332
212

Glide planes

Glide planes are noted by a, b, or c depending on which axis the glide is along. There is also the n glide, which is a glide along the half of a diagonal of a face, and the d glide, which is along a quarter of either a face or space diagonal of the unit cell. The d glide is often called the diamond glide plane as it features in the diamond structure.

  • a, b, or c glide translation along half the lattice vector of this face.
  • n glide translation along with half a face diagonal.
  • d glide planes with translation along a quarter of a face diagonal.
  • e two glides with the same glide plane and translation along two (different) half-lattice vectors.

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. http://it.iucr.org/Ab/ch10o1v0001/#table10o1o4o3
  3. Families of point groups
  4. Vainshtein, Boris K., Modern Crystallography 1: Fundamentals of Crystals. Symmetry, and Methods of Structural Crystallography, Springer. 1994, page 93.
  5. Point groups in three dimensions
  6. Shubnikov, A.V., Belov, N.V. & others, Colored Symmetry, Oxford: Pergamon Press. 1964, page 70.

External links