HMAS Junee
HMAS Junee as a training ship in 1954. Her wartime armament has been replaced with two 40 mm Bofors guns.
HMAS Junee as a training ship in 1954. Her wartime armament has been replaced with two 40 mm Bofors guns.
|
|
History | |
---|---|
Australia | |
Namesake: | Town of Junee, New South Wales |
Builder: | Poole & Steel |
Laid down: | 17 February 1943 |
Launched: | 16 November 1943 |
Commissioned: | 11 April 1944 |
Decommissioned: | 21 January 1946 |
Recommissioned: | 25 February 1953 |
Decommissioned: | 21 August 1957 |
Reclassified: | Training ship (1953) |
Honours and awards: |
|
Fate: | Sold for scrap in 1958 |
General characteristics | |
Class & type: | Bathurst-class corvette |
Displacement: | 650 tons (standard), 1,025 tons (full war load) |
Length: | 186 ft (57 m) |
Beam: | 31 ft (9.4 m) |
Draught: | 8.5 ft (2.6 m) |
Propulsion: | triple expansion engine, 2 shafts, 1,800 horspeower |
Speed: | 15 knots (28 km/h; 17 mph) at 1,750 hp |
Complement: | 85 |
Armament: | 1 × 4-inch gun, 1 × 40 mm anti-aircraft gun |
HMAS Junee (J362/M362), named for the town of Junee, New South Wales, was one of 60 Bathurst-class corvettes constructed during World War II, and one of 36 initially manned and commissioned solely by the Royal Australian Navy (RAN).[1]
Contents
Design and construction
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
In 1938, the Australian Commonwealth Naval Board (ACNB) identified the need for a general purpose 'local defence vessel' capable of both anti-submarine and mine-warfare duties, while easy to construct and operate.[2][3] The vessel was initially envisaged as having a displacement of approximately 500 tons, a speed of at least 10 knots (19 km/h; 12 mph), and a range of 2,000 nautical miles (3,700 km; 2,300 mi)[4] The opportunity to build a prototype in the place of a cancelled Bar-class boom defence vessel saw the proposed design increased to a 680-ton vessel, with a 15.5 knots (28.7 km/h; 17.8 mph) top speed, and a range of 2,850 nautical miles (5,280 km; 3,280 mi), armed with a 4-inch gun, equipped with asdic, and able to fitted with either depth charges or minesweeping equipment depending on the planned operations: although closer in size to a sloop than a local defence vessel, the resulting increased capabilities were accepted due to advantages over British-designed mine warfare and anti-submarine vessels.[2][5] Construction of the prototype HMAS Kangaroo did not go ahead, but the plans were retained.[6] The need for locally built 'all-rounder' vessels at the start of World War II saw the "Australian Minesweepers" (designated as such to hide their anti-submarine capability, but popularly referred to as "corvettes") approved in September 1939, with 60 constructed during the course of the war: 36 (including Junee) ordered by the RAN, 20 ordered by the British Admiralty but manned and commissioned as RAN vessels, and 4 for the Royal Indian Navy.[2][7][8][9][1]
Junee was laid down by Poole & Steel at Balmain, New South Wales on 17 February 1943.[1] She was launched on 16 November 1943 by the wife of John Solomon Rosevear, Speaker of the Australian House of Representatives, and commissioned into the RAN on 11 April 1944.[1]
Operational history
World War II
After entering active service, Junee was briefly assigned to New Guinea before being redeployed to Darwin, where she served as an anti-submarine patrol ship until February 1945, when the corvette underwent refit in Melbourne.[1]
In April 1945, Junee was sent to New Guinea, to serve as a convoy escort and anti-submarine patrol ship.[1] In August, the corvette fired her weapons in anger for the first time; sinking three Japanese supply barges while in the Sangir Islands.[1] The corvette was later assigned to Balikpapan as a guard ship, where she remained until the end of World War II.[1]
Following the end of the war, Junee evacuated Australian prisoners-of-war and civilians, assisted in the transportation of occupation forces, and aided in the reestablishment of Dutch authority in the Netherlands East Indies.[1] After fulfilling these duties, Junee returned to Australia, and was paid off into reserve in Melbourne on 21 January 1946.[1]
Junee received two battle honours for her wartime service: "New Guinea 1943" and "Pacific 1944–45".[10][11]
Post-war
The corvette was reactivated and recommissioned as a training ship on 25 February 1953.[1] Initially operating along the east coast, Junee was reassigned to the west coast on 25 August, operating from Fremantle.[1]
Decommissioning and fate
HMAS Junee paid off to reserve for the final time at Fremantle on 21 August 1957.[1] She was sold for scrap to W. G. Davies of Fremantle on 18 June 1958.[1] The ship was stripped and the hull sunk in the Rottnest ship graveyard off Rottnest Island, Western Australia on 6 or 7 September 1968.[1][12]
Citations
<templatestyles src="Reflist/styles.css" />
Cite error: Invalid <references>
tag; parameter "group" is allowed only.
<references />
, or <references group="..." />
References
- Books
- Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.
- Journal and news articles
- Lua error in package.lua at line 80: module 'strict' not found.
External links
Wikimedia Commons has media related to M362 Junee (ship, 1944). |
- ↑ 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 2.0 2.1 2.2 Stevens, The Australian Corvettes, p. 1
- ↑ Stevens, A Critical Vulnerability, p. 103
- ↑ Stevens, A Critical Vulnerability, pp. 103–4
- ↑ Stevens, A Critical Vulnerability, pp. 103–5
- ↑ Stevens, A Critical Vulnerability, p. 104
- ↑ Stevens, A Critical Vulnerability, pp. 105, 148
- ↑ Donohue, From Empire Defence to the Long Haul, p. 29
- ↑ Stevens et al., The Royal Australian Navy, p. 108
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.