Hampton Wind Park
| Hampton Wind Park | |
|---|---|
 Location of Hampton Wind Park
in New South Wales |
|
| Country | Australia |
| Location | Near Lithgow, New South Wales |
| Coordinates | Lua error in package.lua at line 80: module 'strict' not found. |
| Status | Operational |
| Commission date | 20 September 2001 |
| Construction cost | A$2.4 million |
| Owner(s) | Hampton Wind Park Company |
| Operator(s) | Hampton Wind Park Company |
| Wind farm | |
| Type | onshore |
| Hub height | 50 m (164 ft) |
| Rotor diameter | 47 m (154 ft) |
| Rated wind speed | 28.4 revolutions per minute |
| Power generation | |
| Units operational | 2 X 660kW |
| Make and model | Vestas: V47 |
| Nameplate capacity | 1.32 MW |
| Annual generation | 3 GW hours |
The Hampton Wind Park is a wind power station near Hampton, south-east of Lithgow, New South Wales, Australia. Initiated, developed and operated privately by a landholder, the farm has two wind turbines, with a total nameplate capacity of 1.32 MW of renewable electricity which is supplied to the main electricity grid.[1]
Technical information
Wind Corporation Australia, an energy development company, was established in 2000 by founding investor CVC REEF Limited to develop and commission the Hampton Wind Park.[2] Project cost was A$2.4 million, funded by an investment by CVC-REEF and the NSW Sustainable Energy Development Authority (SEDA).[1]
Opened in September 2001, the wind farm reduces greenhouse gases by 3,000 tonnes each year[3] over the 20 year life of the project, compared to the equivalent electricity generation from coal. The wind turbines are Vestas V47-660 kW models, with 50 metres (160 ft) hub height and 47 metres (154 ft) rotor diameter.[1]
The wind farm's output feeds the grid, and creates renewable energy credits which Integral Energy sells to its Green Power subscribers.
Gallery
-
Hampton Wind Park.ogg
Hampton Wind Park audio/video
See also
References
<templatestyles src="Reflist/styles.css" />
Cite error: Invalid <references> tag; parameter "group" is allowed only.
<references />, or <references group="..." />
