Highland Railway Clan class
|
Specifications |
Configuration |
4-6-0 |
UIC class |
2′C h2 |
Gauge |
4 ft 8 1⁄2 in (1,435 mm) standard gauge |
Leading dia |
3 ft 0 in (0.914 m) |
Driver diameter |
6 ft 0 in (1.829 m) |
Loco weight |
63.25 long tons (64.26 t; 70.84 short tons) |
Tender weight |
42 long tons (43 t; 47 short tons) |
Boiler |
Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value). diameter, with Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value). taper |
Boiler pressure |
175 psi (1.21 MPa) |
Firegrate area |
25.5 sq ft (2.37 m2) |
Heating surface |
Lua error in Module:Convert at line 272: attempt to index local 'cat' (a nil value). |
Superheater |
Robinson |
• Heating area |
256 sq ft (23.8 m2) |
Cylinders |
Two, outside |
Cylinder size |
21 in × 26 in (533 mm × 660 mm) |
Valve gear |
Walschaerts |
Valve type |
10 in (254 mm) piston valves |
|
|
Career |
Operators |
HR → LMS → BR |
Power class |
LMS/BR: 4P |
Numbers |
HR: 49, 51–57
LMS: 14762–14769
BR: 54767 |
Withdrawn |
1943–1950 |
Disposition |
All scrapped |
|
The Highland Railway's Clan Class was a class of passenger 4-6-0 steam locomotives designed by Christopher Cumming. The design is derived from that of the slightly earlier Clan Goods although the similarity is more visual than real. The first four were built in 1919, and the remaining four in 1921.
Dimensions
They had 21-by-26-inch (533 by 660 mm) cylinders outside with outside Walschaerts valve gear, 6 ft 0 in (1.83 m) driving wheels and a boiler pressured to 175 psi (1.21 MPa). Weight was 62 long tons 5 cwt (139,400 lb or 63.2 t) for the locomotive and 42 long tons (43 t; 47 short tons) for the tender. Piston valve diameter is given as 10 inches (254 mm) (quite large for the period), but they had the conventional short lap, short travel valves. Bearing in mind that they probably spent a large part of their time slogging uphill or coasting down this was probably not too important. Total evaporative heating surface is given as 1,467 sq ft (136.3 m2), plus 256 sq ft (23.8 m2) for the Robinson type superheater, and grate area as 25.5 sq ft (2.37 m2).
Oil firing
Early in 1921 Clan Stewart was used for experiments with oil firing. This seems to have been successful, but was not applied to any other locomotives. Just when Clan Stewart reverted to coal operation does not seem to be recorded.
Transfer to LMS
The locomotives passed to the London, Midland and Scottish Railway (LMS) in 1923. The LMS classified them '4P'.
Transfer to BR
Two survived into British Railways (BR) hands in 1948, but only Clan Mackinnon received its BR number. Some of the Clan names were later reapplied to the BR Standard Class 6.
Numbering
References
- Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.