Polyvinyl acetate

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Lua error in package.lua at line 80: module 'strict' not found.

Polyvinyl acetate
Polyvinyl acetate
Names
IUPAC name
poly (1-acetyloxiethene)
Other names
PVAc, PVA, Poly(ethenyl ethanoate), Poly(ethenyl acetate)
Identifiers
9003-20-7 YesY
Jmol 3D model Interactive image
KEGG C12282 YesY
PubChem 7758
  • O([C@@H](C*)*)C(C)=O
Properties
(C4H6O2)n
Molar mass 86.09 g/mol/unit
Density 1.19 g/cm3 (25 °C)
Boiling point 112 °C (234 °F; 385 K)
Vapor pressure {{{value}}}
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Poly(vinyl acetate) (PVA, PVAc, poly(ethenyl ethanoate): commonly referred to as wood glue, white glue, carpenter's glue, school glue, Elmer's glue in the US, or PVA glue) is an aliphatic rubbery synthetic polymer with the formula (C4H6O2)n. It belongs to the polyvinyl esters family with the general formula -[RCOOCHCH2]-. It is a type of thermoplastic.[1]

Properties

The degree of polymerization of poly(vinyl acetate) is typically 100 to 5000 while its ester groups are sensitive to base hydrolysis and will slowly convert PVAc into polyvinyl alcohol and acetic acid.

Under alkaline conditions, boron compounds such as boric acid or borax cause the polymer to cross-link, forming tackifying precipitates or toys such as Slime and Flubber.

A number of microorganisms can degrade polyvinyl acetate; most commonly, damage is caused by filamentous fungi however there are also algae, yeasts, lichens and bacteria that have been shown to degrade polyvinyl acetate.[2]

Discovery

Poly(vinyl acetate) was discovered in Germany in 1912 by Fritz Klatte.[3]

The monomer, vinyl acetate, was first produced on an industrial scale by addition of acetic acid to acetylene with a mercury(I) salt[4] but it is now primarily made by palladium catalyzed oxidative addition of acetic acid to ethylene.

Preparation

PVAc is a vinyl polymer. Polyvinyl acetate is prepared by polymerization of vinyl acetate monomer (free radical vinyl polymerization of the monomer vinyl acetate).

Applications

As an emulsion in water, PVAc emulsions are used as adhesives for porous materials, particularly for wood, paper, and cloth, and as a consolidant for porous building stone, in particular sandstone.[5] Uses:

  • as wood glue PVAc is known as "white glue" and the yellow as "carpenter's glue" or PVA glue.
  • as paper adhesive during paper packaging converting
  • in bookbinding and book arts, due to its flexible strong bond and non-acidic nature (unlike many other polymers). The use of PVAc on the Archimedes Palimpsest during the 20th century greatly hindered the task of disbinding the book and preserving and imaging the pages in the early 21st century, in part because the glue was stronger than the parchment it held together.
  • in handicrafts
  • as envelope adhesive
  • as wallpaper adhesive
  • as a primer for drywall and other substrates

The stiff homopolymer PVAc, but mostly the more soft copolymer, a combination of vinyl acetate and ethylene, vinyl acetate ethylene (VAE), is used also in paper coatings, paint and other industrial coatings, as binder in nonwovens in glass fibers. sanitary napkins, filter paper and in textile finishing.

Polyvinyl acetate is also the raw material to make other polymers like:

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. See:
    (1) Deutsche Reichs Patent no. 281687 (4 July 1913), an abstract of which appears in the Journal of the Society of Chemical Industry (London), vol. 34, page 623 (1915);
    (2) Deutsche Reichs Patent no. 281688 (2 April 1914);
    (3) British patent no. 15271 (25 June 1914.);
    (4) Fritz Klatte and Adolf Rollett, "Plastic composition and process of producing it," U.S. Patent 1,241,738 (filed: July 3, 1914; issued: Oct. 2, 1917), an abstract of which appears in the Journal of the Society of Chemical Industry (London), vol. 36, page 1185 (1917).
  4. Rutherford John Gettens and George Leslie Stout, Painting Materials: A Short Encyclopaedia (Princeton, New Jersey: D. Van Nostrand, 1942),page 74.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. H. Staudinger, K. Frey, W. Stark, Ber. Deut. Chem. Ges. 1927, 60, 1782.

Lua error in package.lua at line 80: module 'strict' not found.