General Electric GE36
Lua error in package.lua at line 80: module 'strict' not found.
GE36 | |
---|---|
![]() |
|
NASA/GE Unducted Fan | |
Type | Unducted fan |
National origin | United States |
Manufacturer | General Electric Aircraft Engines |
First run | 1986 |
Major applications | Boeing 7J7 (proposed) |
Developed from | General Electric F404 |
Born in response to the 1967 Oil Embargo, the 1973 oil crisis, and especially the 1979 energy crisis The General Electric GE36 was an experimental aircraft engine, a hybrid between a turbofan and a turboprop, known as an Unducted Fan (UDF) or propfan. The GE36 was developed by General Electric Aircraft Engines.[1][2]
A General Electric F404 military turbofan was used as the basis for the GE36. The F404 mixed exhaust stream discharged through a turbine which drove two counter rotating stages of 10 and 8 fan blades each (originally 8 and 8).[3] The scimitar shape of the fan rotor blades enabled high flight speeds (about Mach 0.75) to be obtained. The power turbine was a seven-stage (initially 6-stage[4]) turbine plus inlet and outlet guide vanes. The fourteen turbine blade rows rotated alternate rows in opposite directions. Each stage was a pair of rotors (there were no stators). The counter-rotating turbine ran at half the rpm of a conventional turbine[4] so did not require a reduction gearbox to drive the fan.[5]
Although the engine demonstrated an extremely low specific fuel consumption, cabin noise levels were a problem, even though the engines were mounted at the rear of the test aircraft. However, the noise was not considered an insurmountable problem. The downfall of this engine at the time was economic conditions (mostly a major drop in oil prices) post OPEC oil embargo; and at least the perceived public perception of the external fan blades being too much like “old and slow” prop planes. Even though these engines never made it past development and prototype testing, the carbon composite fan blade technology lives on and is currently being used in engines (General Electric GE90 & General Electric GEnx) that power the Boeing 747, Boeing 777, and Boeing 787 Dreamliner.[2][6]
See also
- Comparable engines
- Related lists
References
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ http://www.flightglobal.com/pdfarchive/view/1987/1987%20-%201622.html
- ↑ 4.0 4.1 http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19900000732.pdf
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.
External links
- “New-Generation GE Open Rotor and Regional Jet Engine Demo Efforts Planned”, Aviation Week - May 12, 2008 - By Guy Norris
- "Green sky thinking - carbon credits and the propfan comeback?", Flight International, June 12, 2007.
- "Boeing UDF test footage", 1985
- "The MD-UDF Demo aircraft arrives at Farnborough", 4 September 1988
- "DREAM - Validation of radical engine architecture systems", Spanish Centre for the Development of Industrial Technology - Dave Bone (Rolls-Royce plc)
![]() |
This aircraft engine article is missing some (or all) of its specifications. If you have a source, you can help Wikipedia by adding them. |