SARAL

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
SARAL
File:SARAL.jpg
An artist's rendering of Satellite with ARgos and ALtika - SARAL
Mission type Remote sensing
Operator ISRO
CNES
COSPAR ID 2013-009A
SATCAT № 39086
Mission duration 5 years (ARGOS)
3 years (AltiKa)
Spacecraft properties
Manufacturer ISRO Satellite Centre
CNES
Launch mass 407 kilograms (897 lb)[1][2]
Start of mission
Launch date 25 February 2013, 12:31 (2013-02-25UTC12:31Z) UTC[3]
Rocket PSLV-CA
Launch site Satish Dhawan FLP
Orbital parameters
Reference system Geocentric
Regime Sun-synchronous
Perigee 790 kilometres (490 mi)
Apogee 791 kilometres (492 mi)
Inclination 98.54 degrees
Period 100.54 minutes
Epoch 30 October 2013, 02:13:46 UTC[4]
Main radar
Wavelengths Ka band[5]
Instruments
ALTIKA, DORIS, LRA, ARGOS-3

SARAL or Satellite with ARgos and ALtiKa is a cooperative altimetry technology mission of Indian Space Research Organisation (ISRO) and CNES (Space Agency of France). SARAL will perform altimetric measurements designed to study ocean circulation and sea surface elevation. The payloads of SARAL are The ISRO built satellite with payloads modules (ALTIKA altimeter), DORIS, Laser Retro-reflector Array (LRA) and ARGOS-3 (Advanced Research and Global Observation Satellite) data collection system provided by CNES was launched by Indian Polar Satellite Launch Vehicle rocket into the Sun-synchronous orbit (SSO). ISRO is responsible for the platform, launch, and operations of the spacecraft. A CNES/ISRO MOU (Memorandum of Understanding) on the SARAL mission was signed on Feb. 23, 2007.[2][6]

SARAL was successfully launched on 25 February 2013, 12:31 UTC.[7][8]

Mission

The SARAL mission is complementary to the Jason-2 mission of NASA/NOAA and CNES/EUMETSAT. It will fill the gap between Envisat and the Sentinel 3 mission of the European GMES program. The combination of two altimetry missions in orbit has a considerable impact on the reconstruction of sea surface height (SSH), reducing the mean mapping error by a factor of 4.[9]

Payloads

Ka band Altimeter, ALTIKA

ALTIKA, the altimeter and prime payload of the SARAL mission, will be the first spaceborne altimeter to operate at Ka band. It built by the French National Space Agency CNES. The payload is intended for oceanographic applications, operates at 35.75 GHz.[1] ALTIKA is set to take over ocean-monitoring from Envisat. It is the first to operate at such a high frequency, making it more compact and delivering better performance than the previous generation.[10]

While existing satellite-borne altimeters determine sea level by bouncing a radar signal off the surface and measuring the return-trip time, ALTIKA operates at a high frequency in Ka band. The advantage of this is twofold. One, the earth’s atmosphere slows down the radar signal, so altimetry measurements are skewed and have to carry additional equipment to correct for this error. Since ALTIKA uses a different system, it does not have to carry an instrument to correct for atmospheric effects as current-generation altimeters do. ALTIKA gets around this problem by operating at a high frequency in Ka band. Another advantage of operating at higher frequencies is greater accuracy. ALTIKA will measure ocean surface topography with an accuracy of 8 mm, against 2.5 cm on average using current-generation altimeters, and with a spatial resolution of 2 km.

The disadvantage, however, is that high-frequency waves are extremely sensitive to rain, even drizzle. 10% of the data is expected to be lost. (Although this could be exploited to perform crude measurements of precipitation).

ARGOS Data Collection System

It built by the French National Space Agency CNES. ARGOS contributes to the development and operational implementation of the global ARGOS Data Collection System. It will collect a variety of data from ocean buoys to transmit the same to the ARGOS ground segment for subsequent processing and distribution.

Solid State C-band Transponder (SCBT)

Is from ISRO and intended for ground RADAR calibration. It is a continuation of such support provided by C-Band Transponders flown in the earlier IRS-P3 and IRS-P5 missions.[1]

The payloads of SARAL are accommodated in the Indian Mini Satellite-2 bus, which is built by ISRO.

SARAL Applications

File:SARAL.jpg
An artist's rendering of Satellite with ARgos and ALtiKa - SARAL

SARAL data products will be useful for operational as well as research user communities in many fields like[1]

  • Marine meteorology and sea state forecasting
  • Operational oceanography
  • Seasonal forecasting*
  • Climate monitoring
  • Ocean, earth system and climate research
  • Continental ice studies
  • Protection of biodiversity
  • Management and protection of marine ecosystem
  • Environmental monitoring
  • Improvement of maritime security

References

  1. ↑ 1.0 1.1 1.2 1.3 Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=SARAL&oldid=5181428"